주요 콘텐츠로 건너뛰기
도움말
19단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

Once the upper receiver is flush with the body you can start adding the trigger grouping.

You will notice that the trigger assemble has slots in the section marked on the first picture. When you look into the under section of the M-14 you will see some protruding sections that the slots connect with.

Simply slide the trigger assemble into place and then press the hedging trigger guard back into it's original position

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.