주요 콘텐츠로 건너뛰기
도움말
5단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

Unplug the antenna cable with tweezers.

The solder joints of some antenna cables might be weak so be careful not to break it out of the motherboard.

Use an opening pick to pry out the motherboard until you can get a good grip.

The front camera is still attached to the motherboard. Don't damage it during the motherboard removal.

Remove the motherboard.

On the back of the motherboard there are thermal pads (pink rubber-like gobs) for heat dissipation. If these thermal pads broke or are too dried out you might need to apply new thermal pads on the new display assembly or the motherboard.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.