1
2
3
To solder the the wire, the circuit board has to be released.
To do this, unscrew the .5 inch screw located in the middle of the board.
Slowly lift the board up off the toaster, making sure that the red pegs that hold the board in place do not break.
« 이전
다음 »
귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.
다음 줄
이전 줄
아래에 새로운 줄 삽입
위에 새로운 줄 삽입
현재 줄 들여쓰기
현재 줄 내어쓰기
현재 줄 삭제
다음 단계로 이동.
이전 단계로 이동.
도움말 열기