Skip to main content
3단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

Identify the two mounting bolts on the rear of the caliper.

Using a 12 mm wrench or socket, remove the two caliper mounting bolts.

Alternatively, you may remove only the bottom mounting bolt and, using the top bolt as a hinge, rotate the caliper up and away from the rotor to access the brake pads. If you do this, skip the next step.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.