주요 콘텐츠로 건너뛰기
도움말
11단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

To reassemble the wheel assembly. Follow the Steps 1-7 in reverse order.

The caliper mounting bolts and the lug nuts must be tightened to the correct torque value, using a torque wrench. The values may differ depending on your car's configuration and options, but are typically listed as:

Caliper bolts: 54 ft lbs

Lug nuts: 80 ft lbs

Remove the jack stand. Then lower and remove the floor jack.

CAUTION! : Before driving the car, pump the brake pedal several times in order to push the caliper piston back against the brake pads. If this step is not performed, the car may not brake reliably when first driven. For your safety, this step is essential.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.