1
2
3
Use the flat end of a spudger to pry the thermal sensor board off the adhesive securing it to the hard drive.
If you're replacing your hard drive, transfer this sensor to the same position on the new drive.
Users have reported that without the sensor connected, the fans will run consistently at maximum speed.
« 이전
다음 »
귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.
다음 줄
이전 줄
아래에 새로운 줄 삽입
위에 새로운 줄 삽입
현재 줄 들여쓰기
현재 줄 내어쓰기
현재 줄 삭제
다음 단계로 이동.
이전 단계로 이동.
도움말 열기