메인 콘텐츠로 스킵하기
도움말
6단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

Flip the circuit board over to reveal the trackball.

If you want to clean the trackball, use an air duster and gently spray it. Keep a distance of 2-4 inches between the duster and trackball.

If you are not replacing the trackball, you may reassemble at this point. If you are replacing the trackball, skip the previous bullet and move on to Step 7.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.