주요 콘텐츠로 건너뛰기
도움말
1단계 편집 중 —

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 21개에 영향을 미칩니다.

단계 유형:

끌어서 재배열 합니다

Later in this guide you will remove several recessed Phillips screws. Bit drivers are generally too large to fit in the recesses, so be sure to have a thin shafted Phillips screwdriver on hand.

First remove the AirPort antenna (the larger of the two), located near the power button.

Slightly squeeze the two retaining arms toward each other and lift the AirPort antenna off its post.

Squeezing the two posts excessively will surely break them off the internal frame. Work delicately.

During reinstallation, you will have to slightly squeeze the two posts together so they fit into the openings on the AirPort antenna board.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.