Skip to main content
1단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

Apply heat to the back glass around the edges. you can do this by one of three ways. 1) the iOpener Tool, 2) the hot air gun, and 3) the mobile dryer.

Lift the corner as much as possible. Should there be any excessive resistance, be sure to apply more heat.

begin working your way through the panel seam. should you encounter and snags, be sure ti dab a minimal amount of alcohal onto your pick, and that will help eat away at the adhesive

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.