Skip to main content
3단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

Disconnect the battery from the board, and Reheat the location to losen adhesive.

Try not to directly heat the battery. if you heat a bad battery, the Lithium may expand and cause damage to the board or self.

Gently lift the battery from the housing. The adhesive is tough, and may require some force. dont puncture the battery while doing this.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.