주요 콘텐츠로 건너뛰기
도움말
7단계 편집 중 —

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 2개에 영향을 미칩니다.

단계 유형:

끌어서 재배열 합니다

Before sealing the display in place, connect the flex cables for the display and fingerprint sensor, and then power your phone on.

Test all functions to make sure your repair was successful before sealing up the display.

When fully inserted, the white line across each flex cable should be even with the markings on the motherboard on each side of the cable.

Do not remove, insert, or adjust the cables while the phone is powered on.

The cables can be tricky to align and install. Be sure not to touch the gold contacts on the back, or your finger oils may cause a malfunction. If you do accidentally touch them, wipe them gently with isopropyl alcohol.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.