주요 콘텐츠로 건너뛰기
도움말
5단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

The main power board is located directly behind the power button, screwed into the front plate.

Disconnect all the wires from the main power board by removing the white clips from their corresponding sockets mounted on the board.

For reference to replace wires, see labeled picture of main board.

LED.

DC-in board.

Battery.

Crank.

With the Philips #0 screwdriver, unscrew the four screws mounting the board to the front plate. Remove the board from the front plate. Set aside screws for reassembly.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.