1
2
3
4
5
6
7
Replace all the wires from components into the new main board. Trace the wire from each component and insert where specified on the diagram.
Make sure grooves on the clip holding the wires together for each component align with the pins in the socket on the main board before inserting.
« 이전
다음 »
귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.
다음 줄
이전 줄
아래에 새로운 줄 삽입
위에 새로운 줄 삽입
현재 줄 들여쓰기
현재 줄 내어쓰기
현재 줄 삭제
다음 단계로 이동.
이전 단계로 이동.
도움말 열기