주요 콘텐츠로 건너뛰기
도움말
15단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

Go back to the fuel tank access ports.

Remove the electrical connector for the fuel pump.

Use a large flat blade screw driver to insert into the tab. Gently push the top of the screw driver toward the wires.

Pull up on the connector. If yours is difficult to remove, you can get some extra leverage from a 90° screwdriver as shown.

Be sure to release the latch (using the large flat blade screwdriver) before prying up with the 90° screwdriver.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.