주요 콘텐츠로 건너뛰기
도움말
27단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

Back on the driver's side...

Connect the two fuel lines inside the fuel tank to the fuel filter assembly.

These lines are different sizes so you can't mix them up.

Again, press these lines on until you hear or feel a click. You shouldn't be able to remove the hose by pulling on it (unless you press the release tab).

Place the new gasket in place on the fuel tank as shown. Clean the mating edge of the fuel tank first so you get a good seal.

Continue connecting the electrical connections to the fuel filter assembly. These connections should be the same as when you removed the original fuel filter assembly.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.