주요 콘텐츠로 건너뛰기
도움말
10단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

The old capacitors are these rectangle shaped components shown here.

The factory capacitors are glued down. Using a small pair of needle nose pliers, gently pull up on the capacitor to break it free.

The capacitors are surface-mount, so simple melt the solder on each leg and pull it free.

Only replace ONE capacitor at a time. This minimizes the chances of you forgetting which ones went where.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.