Skip to main content
4단계 편집 중 —

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 6개에 영향을 미칩니다.

단계 유형:

끌어서 재배열 합니다

Carefully lift the antenna cable and de-route it from the edge of the phone. Use the point of a spudger to help lift the cable to free it from the retaining clips.

If the cable does not have enough room to lift up, loosen this Phillips screw securing the logic board so that the board can give more wiggle room.

Be sure to re-tighten this screw during re-installation.

During re-installation, be sure to route the antenna cable underneath the logic board corner.

During re-installation, you can also re-insert the SIM card tray after re-routing the antenna cable.

If you feel any resistance, stop and make sure that the tray isn't snagging the antenna cable.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.