메인 콘텐츠로 스킵하기
도움말
6단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

Loosen and remove the two bolts located on the backside of the caliper with a 12mm socket.

Torque the two bolts to 33 ft-lbs when putting the caliper back on the mounting bracket.

Remove the caliper from the mounting bracket.

Do not allow the caliper to hang freely. This will causes stretching or internal blocking of the brake line.

TIP: Using hang wire to hang the caliper on the spring mount to keep it out of the way.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.