Skip to main content
도움말
2단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

Carefully lift up the MLB board. Underneath it is another ZIF connector. Use a spudger to flip the small flap on the ZIF connector.

This will take a few tries to get it done correctly. Remember to not use too much force as you do not want to damage the ZIF connector.

Remove the MLB Board by flipping the device over and letting it fall into your hands.

Completely remove the ribbon cable from the case, reattach it to the MLB board, then place the board and ribbon cable back into its original position.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.