주요 콘텐츠로 건너뛰기
도움말
6단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

Finally, press the top edge of each RAM module to swing it down toward the logic board until the retaining clips on each side snap into place.

If the rubber guards interfere with the clips, spread the rubber guards away from the RAM with one hand and use the other to angle the RAM modules into place. Then, release the guards.

Check the clips and make sure both modules are fully seated and secure.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.