주요 콘텐츠로 건너뛰기
도움말
1단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

Peel the hold switch cable from along the edge of the battery and lay it aside. The hold switch cable is not attached to the battery.

The battery is held on to the logic board by a strong adhesive. Force may be required to remove the battery from the logic board.

Pry the battery off the adhesive securing it to the metal tray on the logic board.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.