메인 콘텐츠로 스킵하기
도움말
3단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

Note the locations of the wires and where they are attached. If you happen to dislodge the wires during removal you will be able to re-attach them upon re-installation.

Locate and remove the four anchoring 12mm long #2 Phillips screws for the head unit using the #2 screwdriver.

It is now safe to pull out the head unit. Support it in one hand to reduce tension in the cables.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.