Skip to main content
도움말
3단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

Tighten the drain plug using the 10mm hex.

Fill the transfer case with the ATF oil using the vacuum oil pump. When the case is full, oil will begin dripping out of the fill hole.

Insert and tighten the filler plug using the 10 mm hex.

Be careful to line up each plug carefully to prevent cross-threading. Do not overtighten the plugs, as overtightening may cause the threads to strip.

Due to limited resources the transfer case oil was not actually changed.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.