주요 콘텐츠로 건너뛰기
도움말
4단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

Apply a few drops of adhesive remover evenly along the elevated edge of your glued-down component.

A little bit goes a long way, so start with a very small amount. You can always add more later if needed. Applying the solvent in small amounts helps prevent unwanted leaks.

Wait 2-3 minutes for the liquid adhesive remover to penetrate and soften the adhesive before you proceed to the next step.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.