주요 콘텐츠로 건너뛰기
도움말
6단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

Before installing or gluing down any new components, remove any remaining adhesive residue from your device.

Peel off larger pieces of adhesive using tweezers or gloved fingers.

Scrape away any remaining adhesive with a plastic tool, and clean the underlying areas with adhesive remover or isopropyl alcohol. Wipe in one direction, not back and forth, until all the adhesive residue is gone.

This can take quite a bit of work, so be patient.

When your device is clean and dry, go ahead and install your new part and reassemble your device.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.