주요 콘텐츠로 건너뛰기
도움말
2단계 편집 중 —

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 21개에 영향을 미칩니다.

단계 유형:

끌어서 재배열 합니다

If your iPad's screen is badly cracked, wear skin and eye protection. Cover the screen with a smooth layer of clear packing tape to contain glass shards and help the suction cup adhere. Alternatively, use a strong piece of tape (such as duct tape) and fold it into a handle.

Place a suction cup next to the iPad's home button and press down to create a seal.

To get the most leverage, place the suction cup as close to the edge as possible without going past the edge of the display.

Firmly pull up on the suction cup to create a small gap between the front panel and the rear case.

Don't pull too hard, or you may shatter the glass. If necessary, apply more heat to further soften the adhesive.

Once you've opened a sufficient gap, insert an opening pick into the gap.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.