1
2
3
4
5
Place the frame back into position.
Install the four plastic spreader rivets.
Ensure they are seated by using a socket (as shown) to ensure rivets are fully seated before pushing in the center pin.
« 이전
다음 »
귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.
다음 줄
이전 줄
아래에 새로운 줄 삽입
위에 새로운 줄 삽입
현재 줄 들여쓰기
현재 줄 내어쓰기
현재 줄 삭제
다음 단계로 이동.
이전 단계로 이동.
도움말 열기