메인 콘텐츠로 스킵하기
도움말
3단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

Remove the tape covering the connector. Note: Tape should be added to the connector to keep it secure.

Here on the picture you can see the connector with its two holders unlocked. These hold the connector in and should be completely pushed in.

Push the connector in. Do this until it is fully connected again.

Lock the tabs that retain the keyboard connector back in place.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.