Skip to main content
도움말
4단계 편집 중 —

알림: 귀하는 지금 열람하신 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 사용하는 모든 39 안내서에 영향을 미칩니다.

단계 유형:

끌어서 재배열 합니다

In order to remove the front panel assembly, the ribbon cable needs to slide out between the case and the LCD. You'll need to move the LCD to make some room.

Be very careful when moving the LCD, and do not attempt to remove it from the iPad—its cable will remain connected while it is rotated over.

Lift the LCD from its long edge farthest from the digitizer cable and gently flip it toward the rear case—like closing a book.

While holding the LCD up, gently slide the front panel away from the iPad. Be careful not to snag the digitizer cable on the rear case or LCD.

Set the LCD back into the body for safekeeping.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.