주요 콘텐츠로 건너뛰기
도움말
7단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

Line up the rear camera bezel with the cutouts on the rear glass, then set it down on the adhesive. Make sure the side with the camera lens cover protruding is facing the rear glass.

Make sure the camera lens cover is completely seated in the rear glass's camera cutout so that the bezel lays flat against the glass.

Use your fingers to apply even pressure to the bezel for 30 seconds to make sure the adhesive bonds properly.

Right before you install the rear glass and seal the phone, peel off the black backing covering the camera glass.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.