주요 콘텐츠로 건너뛰기
도움말
3단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

Peel one of the end adhesive strips from the clear plastic backing.

The strips are cut for a specific end and are not interchangeable.

Hold the strip by the two green end tabs and line the adhesive strip with the phone frame.

Lay the adhesive down lightly on the phone. Make sure that all cutouts are properly aligned.

Once aligned, use your fingers to press the adhesive into place.

Repeat the procedure for the remaining adhesive strip.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.