메인 콘텐츠로 스킵하기
도움말
1단계 편집 중 —

알림: 귀하는 지금 열람하신 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 사용하는 모든 41 안내서에 영향을 미칩니다.

단계 유형:

끌어서 재배열 합니다

Before starting this procedure, you must disable your Mac's Auto Boot feature. Auto Boot powers on your Mac when you open the lid, and may be accidentally triggered during disassembly. Use this guide or follow the abbreviated instructions below to disable Auto Boot.

Power on your Mac and launch Terminal.

Copy and paste the following command (or type it exactly) into Terminal:

sudo nvram AutoBoot=%00

Press [return]. If prompted, enter your administrator password and press [return] again. Note: Your return key may also be labeled ⏎ or "enter."

You can now safely power down your Mac and open the bottom case, without it accidentally powering on.

When your repair is complete and your Mac is successfully reassembled, re-enable Auto Boot with the following command:

sudo nvram AutoBoot=%03

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.