주요 콘텐츠로 건너뛰기
도움말
5단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

If your part did not come with pre-cut adhesive, use high-bond double-sided tape, such as Tesa 61395, or pieces of a pre-cut adhesive sheet to secure the camera bezel.

Cut pieces of tape to the appropriate size so they fit along the edges of the camera bezel. When in doubt, use a narrower size tape than you think you might need.

Use tweezers to apply the tape to the metal surface of the bezel, on the side where the camera lens cover protrudes.

Try to cover most of the metal surface of the bezel with tape. Avoid overlapping tape onto any plastic or glass areas.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.