주요 콘텐츠로 건너뛰기
도움말
9단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

Remove the crimped hose clamps securing from each end of the pump you are replacing.

You can use a clamp removal tool to cut the clamps.

Alternatively, use pliers to unlatch the small retaining tab on the clamp.

Pry the clamp apart to loosen it.

Use your fingers or pliers to pull the hoses off of the pump nozzles.

The hoses will leak liquids when pulled out.

This will take significant force. If you are having trouble, heat the hose ends with a hair dryer or heat gun, and try again.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.