주요 콘텐츠로 건너뛰기

기기를 고치세요

수리할 권리

부품 & 도구

도움말
11단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

Cut the zip ties holding the bundle of wires together.

Carefully trace the two wires coming out of the pump you are replacing.

The pump wires should connect to a black wire and a white wire.

There may be a diode attached in-line on the red wire.

Disconnect the pump by pulling the wire terminals apart. This may take significant force. Pull at the terminals, not the wires.

If there is an in-line diode, disconnect and remove it. Do not use it with the replacement part.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.