주요 콘텐츠로 건너뛰기
도움말
7단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

If the connector board is still connected to the CD-ROM unit:

Remove the connector board using two fingers on either side of the board and prying it up.

When assembling, place the connector board on the logic board inside the housing. Push it down until the connector pins are visible at the surface of the connector board.

When assembling, make sure the two logic boards (one in the housing and one on the CD-ROM unit) are pushed into the connector board all the way.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.