주요 콘텐츠로 건너뛰기
도움말
4단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

You will see an red and an black cable soldered to the PCB.

Now get your solder iron ready to desolder the 2 cables. Heat and melt the solder, with your other hand hold the tweezer. When the solder is melting, remove the cable with your tweezer to get the cable out.

It's recommended you use desoldering wick, so you can put some fresh new solder on the pads. Recommended but not required.

Now it should look like the last photo.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.