주요 콘텐츠로 건너뛰기

PSP 300x WI-FI Antenna Replacement/Removal

2 단계
PSP 300x  WI-FI Antenna Replacement/Removal, Casing: 0 단계, 이미지 3개 중 1개 PSP 300x  WI-FI Antenna Replacement/Removal, Casing: 0 단계, 이미지 3개 중 2개 PSP 300x  WI-FI Antenna Replacement/Removal, Casing: 0 단계, 이미지 3개 중 3개
Casing
  • Peel back the warranty sticker that is behind the battery with a spudger or your fingernail.

  • Unscrew all four screws from the back of the PSP with the Phillips #00 Screwdriver.

  • Two are located behind the battery's warranty sticker.

  • Two are located on the right side of the PSP.

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.