주요 콘텐츠로 건너뛰기
도움말
5단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

The next few steps will require you to separate the LCD from the adhesive applied to the upper and lower edges of the front bezel.

The adhesive is applied such that it sticks to a thin steel strip around the perimeter of the LCD. When prying your LCD away from the front panel, be sure you are separating the front panel from the steel strip on the LCD.

Use the flat end of a spudger to gently lift one of the top corners of the LCD out of the front bezel.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.