주요 콘텐츠로 건너뛰기

iPhone 11 Pro Max 분해도

15 단계
iPhone 11 Pro Max Teardown: 0 단계, 이미지 3개 중 1개 iPhone 11 Pro Max Teardown: 0 단계, 이미지 3개 중 2개 iPhone 11 Pro Max Teardown: 0 단계, 이미지 3개 중 3개
  • That mystery board that we spotted in the X-ray below the battery serves (in part anyway) as an interconnect for the battery, wireless charging coil, and Taptic Engine.

  • So we have a secondary battery connector for the first time ever in an iPhone, plugging in directly adjacent to the wireless charging coil. We're not sure what Apple was up to here.

  • Apple did post a new support document today, stating that iPhone 11 Pro contains new hardware for monitoring and managing battery performance. So maybe that's all this is, and it just looks suspiciously like bilateral charging hardware.

  • We pop out what appears to be a new barometric sensor design complete with ingress proofing o-ring.

  • All the components at this end of the phone are stuck to the frame with what seems to be a slightly goopier, stickier adhesive than the foamy stuff we remember from last year. Best guess, it's more waterproof that way.

X-레이로 발견한 배터리 아래 있는 미스터리 보드는 (어느 정도) 배터리, 무선 충전 코일 및 Taptic Engine/탭틱 엔진의 연동 역할을 합니다.

따라서 iPhone 최초 이차적 배터리 커넥터는 무선 충전 코일 바로 근처에 직접 연결합니다. 우리는 Apple이 어떤 생각을 했는지 잘 모르겠습니다.

Apple은 iPhone 11 Pro에 배터리 성능을 관찰 및 관리하는 새로운 하드웨어가 포함되어 있다는 새로운 지원 문서를 오늘 게시했습니다. 양 방향 충전 하드웨어처럼 의심스럽게 보일 수 있지만, 아마도 그게 다라고 생각됩니다.

우리는 방수 방진 o-링으로 완성된 새로운 디자인의 기압 센서를 뺍니다.

휴대폰 끝에 있는 모든 부품은 작년에 관찰한 거품보다 약간 더 끈적한 접착제로 보이는 프레임에 붙어 있습니다. 추측컨대, 방수가 더 잘됩니다.

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.