Skip to main content
5단계 편집 중 —

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 사용하는 모든 4 안내서에 영향을 미칩니다.

단계 유형:

끌어서 재배열 합니다

Next, remove the ten 5.92mm T5 torx screws located underneath the kickstand.

Remove the seven 5.87mm T5 torx screws located under the camera casing. There is a sticker covering the second screw from the left.

Disconnect the rear cover from the main shell of the system by loosening it with a spudger where the gaps exist.

There is an electrical ribbon connecting the rear cover to the motherboard. Do not pull apart the rear cover from the motherboard once you have loosened the rear cover from the main system.

Continue working your way around to each corner and loosen the snap-ons on each side until the rear cover comes off.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.