Skip to main content
6단계 편집 중 —

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 사용하는 모든 4 안내서에 영향을 미칩니다.

단계 유형:

끌어서 재배열 합니다

Rotate the device 180 degrees so that the bottom of the device is facing you.

A ribbon connects the battery on the rear cover, to the motherboard. Slowly lift the bottom of the rear cover up until you can see the ribbon.

Use a spudger to push the ribbon away from the motherboard and parallel to the motherboard in order to remove the ribbon.

Separate the rear cover by lifting it up away from the main system.

When reassembling the rear cover to the motherboard, reinserting the ribbon cable with a spudger may prove difficult. In this case, gently use your hands to slide the cable end into the slot until they click into place.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.