메인 콘텐츠로 스킵하기
도움말
5단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

With the four screws unscrewed, the UMD Drive can be removed. Gently lift the drive from its housing.

Make sure as to not damage the UMD ribbon cable (connecting it to the logic board) as you remove the drive.

This may be a good time to clean the laser head or any of the components inside the UMD Drive.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.