메인 콘텐츠로 스킵하기
도움말
1단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

Carefully disconnect the UMD drive ribbon cable from the logic board. Use the PSP opening tools to push the black tabs on the connector horizantally to free the cable.

This connector cannot be removed vertically. Doing so will damage the connector and/or ribbon cable.

At this point it is useful to tape the loose metal parts with some masking tape so they don't fall out whilst you have the PSP the other way up.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.