Remove all visible screws securing the housing above the battery
Insert a pick or a spudger by the silver slot on the left. Along the phone's edge, gently pry up until the housing is released.
This should easily release. If not, check to make sure all screws have been removed (check under stickers)
Disconnect the battery from the phone by lifting the battery connector from the phone with a spudger.
Do not use a metal tool to disconnect the battery to avoid shorting it.
Using a spudger, disconnect the screen by carefully lifting the screen connector.
귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.
아래에 새로운 줄 삽입
위에 새로운 줄 삽입
현재 줄 들여쓰기
현재 줄 내어쓰기
현재 줄 삭제
다음 단계로 이동.
이전 단계로 이동.