LG G6 Rear Glass Panel Removal

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 8개에 영향을 미칩니다.

영어

한국어

1 단계 번역중

1 단계

In the following steps you'll be cutting through the adhesive that adheres the rear glass panel to the phone.
For reference, the backside of the panel is shown in the first photo. Note the clearance between the edge of the panel and the fragile ribbon cable beside the fingerprint sensor.
Be careful as you slice and pry to the left side of the fingerprint sensor, as seen from the outside of the phone in the third photo.
Inserting an opening tool more than 3 mm into the phone in this area can damage or tear the fingerprint sensor cable.

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.