주요 콘텐츠로 건너뛰기
도움말
10단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

Unplug the wires connected to the logic board from the Cooling Fan.

Unscrew the three screws (Boxed In Red).

Lift out the Fan and the heat sink it is attached to.

Twist the screw slightly to the left, so that the pointed black plastic point looks like picture 3. It will not come out easily if this is done wrong so check, check then check again.

Lift out the processor carefully.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.