주요 콘텐츠로 건너뛰기
도움말
10단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

Never push in any direction other than straight down. It is easy to damage both the PCB keyboard and the switch in this step. You should not wiggle or bend the switch.

Take a replacement switch and orient it so that the two metal sockets line up with the PCB sockets.

Once the sockets are lined up, gently push straight down so that the switch lies flush with the plate.

You should hear a subtle clicking sound when you insert the switch into the PCB.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.