주요 콘텐츠로 건너뛰기
도움말
8단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

Use a flat head screwdriver to make sure the new switch is good (reconnect battery and turn the switch in either direction as if to turn the vehicle on then start then off. It should turn smoothly and only kick back to the on position. After testing the new switch, disconnect the battery again. Take note of the tab on the case of the switch.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.