Skip to main content
도움말
2단계 편집 중 —

단계 유형:

끌어서 재배열 합니다

Once the Screws are removed gently lift the dvd mechanism out of the way to reveal the connectors.

The Ribbon cable is secured into place with a locking lever. To release it you first have to move the locking mechanism on both sides carefully with a small screwdriver towards the cable as shown in photo. TAKE NOTE of which end connects to each side as the ribbon cable MUST be reconnected the same direction

To remove the power plug gently pull straight up on the power plug to release it from unit. When replacing the DVD mechanism you will be reusing the power plug and ribbon cable.

Replacing the new drive is a simply reverse of this process

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.